Rolling safety profiles AER56 are designed for use in places where, in addition to protecting the room, it is also desired to limit visibility. The profile can be combined with a mesh profile if you want light to enter the room even when the bar is closed.

A crank or electric drive is used to control the safety curtains. In the case of a crank drive, the safety curtain AER56 can be up to 3 m2 in size. The electric drive can be controlled with a key switch, a key switch or a remote control. The key and key switch is dead-man for safety, which means that the safety curtain moves as long as the switch is held down. In the case of a remote control, the switching is of the pulse type, ie the safety curtain automatically moves to the pre-set end position when the button is pressed. Therefore, before pressing the button, it is especially important to make sure that there are no obstacles in the way of the safety curtain and not to leave the safety curtain until it has stopped in the final position! If required, the electric drive can be connected to existing low-voltage systems, such as a card system and automatic fire protection, by means of a control unit.

The largest dimensions for indoor use are 7000mm wide and 21m2 in area, 4000mm wide and 15m2 wide when used outdoors